Conceptor project with movement in house

  This project begins with the challenge to manufacture all components at home, even the movement. The idea is to make a watchcase in steel or another similar material with carbon fiber dial. Bezel and strap of polyurethane. Polycarbonate crystal. We want to design a square watch very attractive for all customers. All data about geometric shapes state that users prefer round shapes instead of square shapes. So it is very difficult to design and develop a watch with square shape and it likes to users. So the idea was incorporate different materials in watch case like polycarbonate crystal or polyurethane bezel parts with a red color. Moreover, in the Conceptor watch lugs put slayer carbon fiber. In the future we can offer the possibility of change of color or another of them. As well, the dial is carbon fiber with 2 levels. It is evident that the conceptor extatico watch dial keeps a distinguishing feature of extatico brand. Conceptor is an unusual watch but a very nice design made in Spain. On other hand extatico type 1 movement would be a very good complement for this conceptual watch. That idea is incorporate this movement in this watch but we look forward to carry on with this project. Conceptor watch ask for a lot and there are people who want to have I their hands. This movement will be the first made in Spain completlly. May be the wheel will made in Swiss but other components will made here in our workshop. The movement would be manual winding, 4 hz, 48-60 hours, 28000 alternances. All parts would be make...

A concept watch project based on Wankel engine

extatico motor wankel           This project was based by Wankel engine shape. The first idea was to make a new movement that  rotated like the piston less rotary engine, but it was very difficult to do it by us . So, we choose to design it the shape only. It is the extatico motor wankel We made a design with dial sinterized in the middle case, in order to join an unique block. The material we choose was stainless steel, in form of powder which  by laser sinterization. As well, we did the watch crown by the same process. The idea was to make all parts possible by this process just in one baked. Thus, we could design each parts and the watch introduced in the market quickly. Now, this project is in...

Tensor Project. A watch based on a bike part

extatico tensor watch   Tensor is a bike part, whose shape of a square is cut on both sides. The idea was to give this form to a chrono watch. On the dial appears  a cyclist  shape, where the wheels are the subdials. Now, this project is in stanby      ...

Bentleys rim Project. A new extatico watch concept

Bentleys rim             This project was inspired by Bentley´s rim. We did a drawing based on its shapes with the idea of produced this watch by sintered metal laser. With this process SML we can produce few watchcases without large series. From a piece until 100 pcs can made by this industrial process. Dial would be welded to watch case as a whole part in the same process. Crystal of plexiglass, hands, our movements would be put inside. Bentleys rim project is in stanby.              ...

Sintered dial Project. The first watch dial made by this industrial process

            We wanted to do a dial with different levels but as a block. We needed to make without parts. So that, we should find a industrial process it allows to do in an operation. The only process that permits that is sintered metal laser. We did until 15 samples for doing the definitive dial. When the dial was finished, we did different finishings and textures. Polished, sandblasted and brushed were made. With that, we achieved different emotions and feeling when the customer looks at the watch and dial.   sintered watch dial, this project has been finished and it looks at our divers.  ...